X-Git-Url: https://git.armaanb.net/?a=blobdiff_plain;f=changelog.md;h=b88cf059d9471c3ca0319792f5fa41b3a0057c22;hb=99528bd789b9485dd9f069131850457ecbc174b6;hp=aa71a13789b3c6de6ef5be30c1b377e23a26854f;hpb=5a81d541de6421ceba608219517c90cc1d4668e1;p=atreides.git

diff --git a/changelog.md b/changelog.md
index aa71a13..b88cf05 100644
--- a/changelog.md
+++ b/changelog.md
@@ -1,8 +1,32 @@
 # Change log
 
+## Deck I: 2018-7-28
+
+* QMK is the default firmware for all boards now.
+
+## Mark 3.7: 2017-6-29
+
+* Manually bending middle switch pins on Alps is no longer necessary.
+* Spacer layer is split into three pieces to be less wasteful with materials.
+
+## Mark 3.6: 2016-3-14
+
+* TMK is the default firmware.
+* New layout with arrows on the fn layer.
+* PCB is now label-side up by default.
+
+## Mark 3.5: 2015-6-23
+
+* Change to Matias switches.
+
+## NX-03: 2015-05-08
+
+* Matias Clicky switches.
+* Alps-compatible switch plate.
+
 ## Mark 3.1: 2014-11-25
 
-* Second revision of circuit board.
+* [Second revision of circuit board](http://gerblook.org/pcb/jweM8BcTbgKCL4zsj8tEYj).
 * Arrows on L2 shifted over one column.
 * Circuit board license changed to match the rest of the Atreus project.
 
@@ -16,7 +40,7 @@ column so they can be hit from the normal position without the pinky key.
 
 ## Mark 3: 2014-10-30
 
-* Initial board design in KiCAD + Racket.
+* Initial [board design](http://gerblook.org/pcb/zqMY66AEsKz3xehSrdoDV6) in KiCAD + Racket.
 * Assembly guide updated to include wood finishing.
 * Cable hole in case spacer has rounded edges.
 * New layout: multidvorak.
@@ -57,7 +81,7 @@ and porting the firmware logic to that.
 
 ## Mark 2: 2014-04-22
 
-* New OpenSCAD case design by Constantine.
+* New OpenSCAD [case design](https://www.flickr.com/photos/technomancy/14719013574) by Constantine.
 * New layouts: hardware dvorak, hardware colemak.
 * Assembly guide.
 
@@ -86,7 +110,7 @@ was documented.
 
 ## NX-01: 2014-02-22
 
-* Initial prototype!
+* [Initial prototype](https://www.flickr.com/photos/technomancy/12805226463)!
 * Case hand-drawn in Inkscape.
 * Teensy 2 microcontroller, hand-wired matrix.
 * Uses TMK firmware.