X-Git-Url: https://git.armaanb.net/?p=atreides.git;a=blobdiff_plain;f=assembly%2Fassembly.tex;h=acd18fb5c8aeaf37f25afedb92356c57b1fd2e11;hp=b73358f15616a34e94052b677a948b4002cc7cf5;hb=72f4ede168a0e847f2047e7321792f602d1834a7;hpb=ab40cabc419425851efb5581dfdc8e3a4f643c06

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index b73358f..acd18fb 100644
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -127,10 +127,10 @@ and solder them in place.
   \includegraphics[width=\linewidth]{diodes.jpg}}
 \vspace{1em}
 
-Once they're soldered, trim the diode legs with wire cutters. (This
-step should be done with protective eye covering.) Keep the diode
-legs; they will be needed in the next step. Repeat until each diode
-position is filled.
+Once they're soldered, trim the diode legs with wire cutters. Hold
+onto the diode leg as you trim it to keep it from flying across
+the room. Keep the diode legs; they will be needed in the next
+step. Repeat until each diode position is filled.
 
 \section{Controller}