Zip tie works for strain relief.

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index e9c4d4a0b308cd79104ecae134f4c69b89d60b85..799b8fd2a49ff5582adb2b1ce19422f2ffa6a8f8 100644 (file)
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -329,9 +329,9 @@ need to reach under to get the joint that connects it to the PCB.
 
 If there is room between the head of the USB cable and the place where
 the cable leaves the case, consider adding strain relief by wrapping
-the cable with electrical tape at the point just below where it leaves
-the case. This will make it so pulling on the cable does not dislodge
-it from the controller.
+the cable with electrical tape or a zip tie at the point just below
+where it leaves the case. This will make it so pulling on the cable
+does not dislodge it from the controller.
 
 \vspace{1em}