Fix taped-pins photo; thanks @arthurnn.

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index b355a605e7451da3cd9bae46a8e506a35e1bc768..ffd29f5d0686c7ccf2490f75773d9b40c46e4a67 100644 (file)
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -152,7 +152,9 @@ closing when you're done.
 
 Take four trimmed diode legs and bend them into an L shape. Hold the
 controller upside down and insert the diode legs into the holes at the
-corners, fixing them in place with tape. Try to get them to point straight.
+corners, (except for the VIN corner, which is not used; use the GND
+hole instead as indicated in the picture below) fixing them in place
+with tape. Try to get them to point straight.
 
 \vspace{1em}
 \noindent\makebox[\textwidth]{%

diff --git a/assembly/taped-pins.jpg b/assembly/taped-pins.jpg
index 718cdad542f8eb2e048de6959882a532add186cc..24638f11e574374dd7f34abb836f83167d5747fa 100644 (file)
Binary files a/assembly/taped-pins.jpg and b/assembly/taped-pins.jpg differ