Mention strain relief.

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index ffd29f5d0686c7ccf2490f75773d9b40c46e4a67..102010de5c54b34914ab3721d35442cd1e64fccb 100644 (file)
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -295,6 +295,14 @@ iron, but getting a desoldering pump is much more effective.
 
 \vspace{1em}
 
+If there is room between the head of the USB cable and the place where
+the cable leaves the case, consider adding strain relief by wrapping
+the cable with electrical tape at the point just below where it leaves
+the case. This will make it so pulling on the cable does not dislodge
+it from the controller.
+
+\vspace{1em}
+
 After the switches are all in and tested, close the case by placing
 the switch plate on top of the spacer and bottom plate, placing the
 top plate on it, and screwing it together with the nuts facing up. If the