From: Phil Hagelberg Date: Thu, 24 Apr 2014 02:27:32 +0000 (-0700) Subject: Merge pull request #5 from ckhroulev/new-thumb-diagram X-Git-Url: https://git.armaanb.net/?p=atreides.git;a=commitdiff_plain;h=630de3098f81a9fc2624ce6ad678238a6df298e2 Merge pull request #5 from ckhroulev/new-thumb-diagram Fix image links. Replace the thumb key wiring diagram. --- 630de3098f81a9fc2624ce6ad678238a6df298e2 diff --cc README.org index f5a2320,8b21885..d7e21ad --- a/README.org +++ b/README.org @@@ -209,10 -209,10 +209,10 @@@ symmetrical, so before inserting the sw that the plate is right-side-up. Use a drop of hot glue on the top and bottom of each switch to affix it in place. - [[wires.jpg]] + [[./wires.jpg]] Once the switches are in place, the matrix must be created. I -recommend getting red wire for the (postitive) rows and black for the +recommend getting red wire for the (positive) rows and black for the (negative) columns. The rows need eight wires with the insulation exposed at intervals matching the spacing of the switches; see the above photo for details. You could also just use many short stripped @@@ -223,10 -223,10 +223,10 @@@ segments of wire instead of a contiguou Most of the row wires will need four segments of insulation, but you'll need two with five for the rows with the inner thumb keys. Physically the inner thumb keys look like two additional -columns, but logically they are treated as if they're in the same -column with the left one in row 3 and the right one in row 4. +columns, but logically they are treated as if they're both in column +number 6; the left key in row 3 and the right one in row 4. - [[matrix.jpg]] + [[./matrix.jpg]] The exposed sections of row wire should be connected to the higher of the pins on the switch using a diode. Be aware that diodes are