From: Phil Hagelberg <phil@hagelb.org>
Date: Wed, 10 Aug 2016 15:11:15 +0000 (+0700)
Subject: Zip tie works for strain relief.
X-Git-Url: https://git.armaanb.net/?p=atreides.git;a=commitdiff_plain;h=69022613199b99dad94898810d79e15316ff2689

Zip tie works for strain relief.
---

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index e9c4d4a..799b8fd 100644
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -329,9 +329,9 @@ need to reach under to get the joint that connects it to the PCB.
 
 If there is room between the head of the USB cable and the place where
 the cable leaves the case, consider adding strain relief by wrapping
-the cable with electrical tape at the point just below where it leaves
-the case. This will make it so pulling on the cable does not dislodge
-it from the controller.
+the cable with electrical tape or a zip tie at the point just below
+where it leaves the case. This will make it so pulling on the cable
+does not dislodge it from the controller.
 
 \vspace{1em}