From 72f4ede168a0e847f2047e7321792f602d1834a7 Mon Sep 17 00:00:00 2001 From: Phil Hagelberg Date: Sat, 21 Mar 2015 22:04:35 +0700 Subject: [PATCH] Advise holding onto the diode leg during trimming. --- assembly/assembly.tex | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/assembly/assembly.tex b/assembly/assembly.tex index b73358f..acd18fb 100644 --- a/assembly/assembly.tex +++ b/assembly/assembly.tex @@ -127,10 +127,10 @@ and solder them in place. \includegraphics[width=\linewidth]{diodes.jpg}} \vspace{1em} -Once they're soldered, trim the diode legs with wire cutters. (This -step should be done with protective eye covering.) Keep the diode -legs; they will be needed in the next step. Repeat until each diode -position is filled. +Once they're soldered, trim the diode legs with wire cutters. Hold +onto the diode leg as you trim it to keep it from flying across +the room. Keep the diode legs; they will be needed in the next +step. Repeat until each diode position is filled. \section{Controller} -- 2.39.2