From 763e24eaaa14734367bffbbb63239afd25b1bd2b Mon Sep 17 00:00:00 2001 From: lucwastiaux Date: Tue, 28 Mar 2017 07:02:48 +0800 Subject: [PATCH] added specs for the screws and nuts --- case/lasergist_steel/README.md | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/case/lasergist_steel/README.md b/case/lasergist_steel/README.md index cc2fbfc..19a9b29 100644 --- a/case/lasergist_steel/README.md +++ b/case/lasergist_steel/README.md @@ -1,5 +1,14 @@ The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates -for both: height: 116mm width: 257mm -switch-plate-only.ai: path lengths: 3369mm -base-plate-only.ai: path lengths: 749mm +* for both: height: 116mm width: 257mm +* switch-plate-only.ai: path lengths: 3369mm +* base-plate-only.ai: path lengths: 749mm + + +need to order: +* 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071 +* 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603 +* M3 small hex nuts https://www.mcmaster.com/#98676A100 + + + -- 2.39.2