From 9a5ca8aaaea012bd8536e38a39b081ed3daa7a05 Mon Sep 17 00:00:00 2001 From: Phil Hagelberg Date: Thu, 11 Feb 2016 21:49:26 +0700 Subject: [PATCH] Mention strain relief. --- assembly/assembly.tex | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/assembly/assembly.tex b/assembly/assembly.tex index ffd29f5..102010d 100644 --- a/assembly/assembly.tex +++ b/assembly/assembly.tex @@ -295,6 +295,14 @@ iron, but getting a desoldering pump is much more effective. \vspace{1em} +If there is room between the head of the USB cable and the place where +the cable leaves the case, consider adding strain relief by wrapping +the cable with electrical tape at the point just below where it leaves +the case. This will make it so pulling on the cable does not dislodge +it from the controller. + +\vspace{1em} + After the switches are all in and tested, close the case by placing the switch plate on top of the spacer and bottom plate, placing the top plate on it, and screwing it together with the nuts facing up. If the -- 2.39.2