1 Stainless Steel plates using Lasergist
2 ======================================
4 Photos: http://imgur.com/gallery/ZaZHV
6 ![Stainless Steel Atreus](http://i.imgur.com/AaAlOPg.jpg)
8 The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates (Cherry MX version)
10 Choose the following settings:
11 * Material: **AISI 304 - Shiny**
12 * Thickness: **1.5 mm**
16 * **switch-plate-only.ai**
17 * Overall dimensions: height: 116mm width: 257mm
18 * Path lengths: 3369mm
19 * **base-plate-only.ai**
20 * Overall dimensions: height: 116mm width: 257mm
23 Additionally, you'll need the following hardware:
24 * 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
25 * 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
26 * 8x M3 small hex nuts https://www.mcmaster.com/#98676A100