\includegraphics[width=\linewidth]{diodes.jpg}}
\vspace{1em}
-Once they're soldered, trim the diode legs with wire cutters. (This
-step should be done with protective eye covering.) Keep the diode
-legs; they will be needed in the next step. Repeat until each diode
-position is filled.
+Once they're soldered, trim the diode legs with wire cutters. Hold
+onto the diode leg as you trim it to keep it from flying across
+the room. Keep the diode legs; they will be needed in the next
+step. Repeat until each diode position is filled.
\section{Controller}