-The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates
+Stainless Steel plates using Lasergist
+======================================
-* for both: height: 116mm width: 257mm
-* switch-plate-only.ai: path lengths: 3369mm
-* base-plate-only.ai: path lengths: 749mm
+Photos: http://imgur.com/gallery/ZaZHV
+[[http://i.imgur.com/AaAlOPg.jpg]]
+The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates (Cherry MX version)
-need to order:
+Choose the following settings:
+* Material: *AISI 304 - Shiny*
+* Thickness: *1.5 mm*
+* *Sandblasting*
+
+Upload the two files:
+* *switch-plate-only.ai*
+ * Overall dimensions: height: 116mm width: 257mm
+ * Path lengths: 3369mm
+* *base-plate-only.ai*
+ * Overall dimensions: height: 116mm width: 257mm
+ * Path lengths: 749mm
+
+Additionally, you'll need the following hardware:
* 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
* 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
* 8x M3 small hex nuts https://www.mcmaster.com/#98676A100