--- /dev/null
+# atreides firmware
+A small mechanical keyboard that is based around the shape of the human hand.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "atreides.h"
--- /dev/null
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifdef KEYBOARD_atreides_astar
+ #include "astar.h"
+#elif KEYBOARD_atreides_astar_mirrored
+ #include "astar_mirrored.h"
+#elif KEYBOARD_atreides_feather
+ #include "feather.h"
+#elif KEYBOARD_atreides_teensy2
+ #include "teensy2.h"
+#elif KEYBOARD_atreides_promicro
+ #include "promicro.h"
+#endif
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments.
+// The second converts the arguments into a two-dimensional array.
+// In the PCBDOWN case we need to swap the middle two keys: k35 and k36.
+#if defined(PCBDOWN)
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+ { k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k36, k25, k26, k27, k28, k29 }, \
+ { k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b } \
+}
+#else
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+ { k00, k01, k02, k03, k04, ___, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, ___, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k35, k25, k26, k27, k28, k29 }, \
+ { k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b } \
+}
+#endif
--- /dev/null
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID 0x1209
+#define PRODUCT_ID 0xA1E5
+#define DEVICE_VER 0x0008
+#define MANUFACTURER Armaan Bhojwani
+#define PRODUCT Atreides
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- /dev/null
+{
+ "keyboard_name": "Atreides",
+ "url": "",
+ "maintainer": "Armaan Bhojwani",
+ "width": 13,
+ "height": 4.7,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.35}, {"x":2, "y":0}, {"x":3, "y":0.35}, {"x":4, "y":0.7}, {"x":8, "y":0.7}, {"x":9, "y":0.35}, {"x":10, "y":0}, {"x":11, "y":0.35}, {"x":12, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.35}, {"x":2, "y":1}, {"x":3, "y":1.35}, {"x":4, "y":1.7}, {"x":8, "y":1.7}, {"x":9, "y":1.35}, {"x":10, "y":1}, {"x":11, "y":1.35}, {"x":12, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.35}, {"x":2, "y":2}, {"x":3, "y":2.35}, {"x":4, "y":2.7}, {"x":8, "y":2.7}, {"x":9, "y":2.35}, {"x":10, "y":2}, {"x":11, "y":2.35}, {"x":12, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.35}, {"x":2, "y":3}, {"x":3, "y":3.35}, {"x":4, "y":3.7}, {"x":5, "y":2.95, "h":1.5}, {"x":7, "y":2.95, "h":1.5}, {"x":8, "y":3.7}, {"x":9, "y":3.35}, {"x":10, "y":3}, {"x":11, "y":3.35}, {"x":12, "y":3.6}]
+ }
+ }
+}
--- /dev/null
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _RS 1
+#define _LW 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QW] = LAYOUT( /* Qwerty */
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P ,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN ,
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH ,
+ KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT
+ ),
+
+ /*
+ * ! @ up { } || pgup 7 8 9 *
+ * # left down right $ || pgdn 4 5 6 +
+ * [ ] ( ) & || ` 1 2 3 \
+ * lower insert super shift bksp ctrl || alt space fn . 0 =
+ */
+ [_RS] = LAYOUT( /* [> RAISE <] */
+ KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR ,
+ KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS ,
+ KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS ,
+ TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ),
+ /*
+ * insert home up end pgup || up F7 F8 F9 F10
+ * del left down right pgdn || down F4 F5 F6 F11
+ * volup reset || F1 F2 F3 F12
+ * voldn super shift bksp ctrl || alt space L0 prtsc scroll pause
+ */
+ [_LW] = LAYOUT( /* [> LOWER <] */
+ KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 ,
+ KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 ,
+ KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 ,
+ KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS )
+};
--- /dev/null
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F4, B2, B4, B5 }
+#if defined(PCBDOWN)
+ #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B6, B3, B1, F7, F6, F5 }
+#else
+ #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B6, E6, D7, C6, D4, D0 }
+#endif
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
--- /dev/null
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "promicro.h"
--- /dev/null
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
--- /dev/null
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
+UNICODE_ENABLE = yes # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+DEFAULT_FOLDER = atreides/promicro