Merge pull request #24 from milkypostman/patch-1

Consider hand separation when placing cable screws

diff --git a/README.org b/README.org
index 89194c9333ac51e57c7816b5015d3804d743e6bb..1836ac71005842d1e4bdd648ec9ec58d9caaf1c0 100644 (file)
--- a/README.org
+++ b/README.org
@@ -8,7 +8,7 @@ possible to [[http://wiki.geekhack.org/index.php?title=Hard-Wiring_How-To][manua
 
 I've seen a number of existing DIY 40% keyboard designs, but most of
 them stagger the rows, which I find very annoying now that I've gotten
-used to the columnar layout of the [[http://ergodox.org][Ergodox]]. In addition, many of the
+used to the columnar layout of the [[https://geekhack.org/index.php?topic=22780.0][Ergodox]]. In addition, many of the
 designs I've seen waste a lot of room on the space bar, failing to
 take into account the fact that the thumb is the strongest and most
 versatile of the fingers. This design avoids both these problems while
@@ -221,7 +221,7 @@ The LaTeX source to the assembly instructions is in the =assembly= directory.
 These fine projects all provided inspiration for various aspects of
 the Atreus, as well as the folks on the =#geekhack= freenode channel.
 
-- [[http://ergodox.org][Ergodox]]
+- [[https://geekhack.org/index.php?topic=22780.0][Ergodox]]
 - [[http://deskthority.net/workshop-f7/onehand-20-keyboard-t6617.html][OneHand]]
 - [[http://blog.fsck.com/2013/12/better-and-better-keyboards.html][keyboard.io]]
 - [[http://geekhack.org/index.php?topic=48718][ErgoT]]

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index e9c4d4a0b308cd79104ecae134f4c69b89d60b85..799b8fd2a49ff5582adb2b1ce19422f2ffa6a8f8 100644 (file)
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -329,9 +329,9 @@ need to reach under to get the joint that connects it to the PCB.
 
 If there is room between the head of the USB cable and the place where
 the cable leaves the case, consider adding strain relief by wrapping
-the cable with electrical tape at the point just below where it leaves
-the case. This will make it so pulling on the cable does not dislodge
-it from the controller.
+the cable with electrical tape or a zip tie at the point just below
+where it leaves the case. This will make it so pulling on the cable
+does not dislodge it from the controller.
 
 \vspace{1em}