formatting

diff --git a/case/lasergist_steel/README.md b/case/lasergist_steel/README.md
index 117a8486c94e4a8058d12a096f7cd8c675a16886..311486e75adc3e52b8dd27c9113601fe97afdbdb 100644 (file)
--- a/case/lasergist_steel/README.md
+++ b/case/lasergist_steel/README.md
@@ -1,11 +1,25 @@
-The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates
+Stainless Steel plates using Lasergist
+======================================

 
 

-* for both: height: 116mm width: 257mm
-* switch-plate-only.ai: path lengths: 3369mm
-* base-plate-only.ai: path lengths: 749mm
+Photos: http://imgur.com/gallery/ZaZHV
+[[http://i.imgur.com/AaAlOPg.jpg]]

 
 

+The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates (Cherry MX version)

 
 

-need to order: 
+Choose the following settings:
+* Material: *AISI 304 - Shiny*
+* Thickness: *1.5 mm*
+* *Sandblasting*
+
+Upload the two files:
+* *switch-plate-only.ai*
+  * Overall dimensions: height: 116mm width: 257mm
+  * Path lengths: 3369mm
+* *base-plate-only.ai*
+  * Overall dimensions: height: 116mm width: 257mm
+  * Path lengths: 749mm
+
+Additionally, you'll need the following hardware:

 * 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
 * 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
 * 8x M3 small hex nuts https://www.mcmaster.com/#98676A100
 * 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
 * 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
 * 8x M3 small hex nuts https://www.mcmaster.com/#98676A100