-[[./layers.jpg]]
-
-The first two shapes in the case file are the top and bottom covers;
-these should be cut on 3mm acrylic (black in the photo). The third is
-the spacer that goes under the fourth, which is the plate on which the
-switches are mounted. These should be cut in 6mm, especially the
-spacer, which needs to be at least as thick as the mini USB cable you
-connect to the microcontroller. I recommend using a mini USB cable
-with as thin a connector as you can find or sanding the connector
-down to the required thickness. The switch plate could be thinner, but
-not under 3mm.
+The original case (=case-mk-i.svg=) design is also included; it is
+slightly less wide and has a minor asymmetry with the screws on the
+bottom side.