-design around the top and bottom of the key clusters; mark I is
-pictured below.
-
-The =3mm-alps-all.eps= file contains the top plate, bottom plate, and
-switch plate for Matias switches. =3mm.eps= contains the files for
-Cherry boards. These pieces can all be cut on 3mm acrylic or wood. The
-=spacer.eps= file should be cut on something thicker; between 4.5mm
-and 6mm is recommended. The spacer needs to be at least as thick as
-the connector of the USB cable you're using.
+design around the top and bottom of the key clusters; mark I has
+straight lines.
+
+The files =alps-top-plate-3mm.eps=, =alps-switch-plate-3mm.eps=, and
+=bottom-plate-3mm.eps= are to be cut in 3mm acrylic or wood. The
+=spacer.eps= file can be cut on something thicker; between 4.5mm and
+6mm is recommended. Alternatively you can cut it in 3mm twice. The
+spacer needs to be at least as thick as the connector of the USB cable
+you're using. If you are using Cherry switches, you should use
+=cherry-3mm.eps= for the top, switch, and bottom plates instead, but
+the spacer is the same.