Merge pull request #32 from aweltsch/fix-openscad-deprecation-warnings

[atreides.git] / README.org

diff --git a/README.org b/README.org
index 1836ac71005842d1e4bdd648ec9ec58d9caaf1c0..368adf074cde3b1a8228229b0f5fffb8a9f31a10 100644 (file)
--- a/README.org
+++ b/README.org
@@ -102,7 +102,7 @@ to the different sizes and orientations of certain keys (backspace,
 shift, enter, etc) many of the labels will be incorrect if present.
 
 Cherry switches have more options. This
-[[http://keyshop.pimpmykeyboard.com/products/full-keysets/dsa-blank-sets-1][DSA-shaped base set]] (spherical indentations on the key, same profile for each
+[[http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/][DSA-shaped base set]] (spherical indentations on the key, same profile for each
 row) from Signature Plastics has 52 1x keys plus a few extras we won't
 use. There are two "deep dish" keys in that set which you can place
 under your index fingers on the home row to help guide your hands to
@@ -130,15 +130,16 @@ for one-off boards it's usually more sensible to stick with a [[http://atreus.te
 
 Layered laser-cut wood or acrylic. The [[http://geekhack.org/index.php?topic%3D54759.msg1304117#msg1304117][mark II case]] (EPS files in the
 =case/= directory) features 8 screw holes and a kind of "stair step"
-design around the top and bottom of the key clusters; mark I is
-pictured below.
+design around the top and bottom of the key clusters; mark I has
+straight lines.
 
-The =3mm-alps-all.eps= file contains the top plate, bottom plate, and
-switch plate for Matias switches. =3mm.eps= contains the files for
-Cherry boards. These pieces can all be cut on 3mm acrylic or wood. The
+The files =alps-top-plate-3mm.eps=, =alps-switch-plate-3mm.eps=, and
+=bottom-plate-3mm.eps= are to be cut in 3mm acrylic or wood. The
 =spacer.eps= file should be cut on something thicker; between 4.5mm
 and 6mm is recommended. The spacer needs to be at least as thick as
-the connector of the USB cable you're using.
+the connector of the USB cable you're using. If you are using Cherry
+switches, you should use =cherry-3mm.eps= for the top, switch, and
+bottom plates instead, but the spacer is the same.
 
 There is also a programmatically-implemented version of the case
 written in OpenSCAD; it is more flexible (you can tweak the number of
@@ -180,7 +181,7 @@ Alps-mount keycaps:
 
 - 50 Matias or Cherry switches from mechanicalkeyboards.com
 - 50 diodes from radio shack, ebay, or whatever
-- 40 1x, 2 1.5x Keycaps from signatureplastics.com OR full keycap set from matias.com
+- 40 1x, 2 1.5x Keycaps from signatureplastics.com OR full keycap set from matias.ca
 - A-star micro from pololu.com
 - Case materials from various sources
 - Case laser cutting: 7.5 minutes on a 100W Epilog laser; varies by source