-The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates
+Stainless Steel plates using Lasergist
+======================================
-* for both: height: 116mm width: 257mm
-* switch-plate-only.ai: path lengths: 3369mm
-* base-plate-only.ai: path lengths: 749mm
+Photos: http://imgur.com/gallery/ZaZHV
+!(Stainless Steel Atreus)[http://i.imgur.com/AaAlOPg.jpg]
+The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates (Cherry MX version)
-need to order:
-* 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
-* 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
-* M3 small hex nuts https://www.mcmaster.com/#98676A100
+Choose the following settings:
+* Material: **AISI 304 - Shiny**
+* Thickness: **1.5 mm**
+* **Sandblasting**
+
+Upload the two files:
+* **switch-plate-only.ai**
+ * Overall dimensions: height: 116mm width: 257mm
+ * Path lengths: 3369mm
+* **base-plate-only.ai**
+ * Overall dimensions: height: 116mm width: 257mm
+ * Path lengths: 749mm
+
+Additionally, you'll need the following hardware:
+* 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
+* 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
+* 8x M3 small hex nuts https://www.mcmaster.com/#98676A100