+++ /dev/null
-# OpenSCAD Atreides case design
-
-This directory contains an OpenSCAD script `atreides_case.scad` that generates Atreides case designs using a number of parameters.
-
-The main parameters are:
-
--`angle` : one half of the angle between the left and the right groups of keys
-- `n_rows`, `n_cols` : number of rows and columns to use
-- `staggering_offsets` : column staggering offsets
-- `cable_hole_width` : width of the hole for the USB cable
-- `hand_separation` : distance between the left and the right groups of keys
-- `screw_hole_radius` : radius of screw holes
-- `use_notched_holes` (boolean) : whether notched Cherry MX switch holes are desired
-
-See comments in `atreides_case.scad` for details.
-
-To use, open this script in OpenSCAD, select **Compile and Render (CGAL)** in the **Design** menu, then select **Export as DXF...**.
-
-Use Inkscape to convert to SVG, if necessary.
-
-Please note that the OpenSCAD version of the case is not a direct port of the canonical DXF; the screw placement is a little bit different, and the curve of the bottom edge sticks out a bit more.