Remove assembly directory

[atreides.git] / changelog.md

diff --git a/changelog.md b/changelog.md
index aa71a13789b3c6de6ef5be30c1b377e23a26854f..b7e4db402f8b34693f442399d798a86680ecc1ed 100644 (file)
--- a/changelog.md
+++ b/changelog.md
@@ -1,8 +1,56 @@
 # Change log
 
+This is a listing of all changes and prototypes for the Atreus
+keyboard design. Changes to the
+[Atreus Deck](https://atreus.technomancy.us/marki) are elsewhere.
+
+## Keyboardio Atreus: 2020-03-17
+
+* Completely redesigned factory-produced case.
+* Metal switch plate.
+* USB C port.
+* Optionally labeled XDA keycaps.
+* 15mm smaller in two dimensions.
+
+## NX-04: 2019-05-25
+
+This was the first prototype to incorporate the redesigned PCB by
+Jesse Vincent.
+
+* 2 additional keys.
+* wooden case with 4 layers instead of 5.
+* detachable USB cable.
+* swappable Cherry MX switches.
+* surface-mount controller and diodes.
+* Kaleidoscope is the default firmware.
+
+## Mark 3.8: 2018-7-28
+
+* QMK is the default firmware for all boards now.
+
+## Mark 3.7: 2017-6-29
+
+* Manually bending middle switch pins on Alps is no longer necessary.
+* Spacer layer is split into three pieces to be less wasteful with materials.
+
+## Mark 3.6: 2016-3-14
+
+* TMK is the default firmware.
+* New layout with arrows on the fn layer.
+* PCB is now label-side up by default.
+
+## Mark 3.5: 2015-6-23
+
+* Change to Matias switches.
+
+## NX-03: 2015-05-08
+
+* Matias Clicky switches.
+* Alps-compatible switch plate.
+
 ## Mark 3.1: 2014-11-25
 
-* Second revision of circuit board.
+* [Second revision of circuit board](http://gerblook.org/pcb/jweM8BcTbgKCL4zsj8tEYj).
 * Arrows on L2 shifted over one column.
 * Circuit board license changed to match the rest of the Atreus project.
 
@@ -16,7 +64,7 @@ column so they can be hit from the normal position without the pinky key.
 
 ## Mark 3: 2014-10-30
 
-* Initial board design in KiCAD + Racket.
+* Initial [board design](http://gerblook.org/pcb/zqMY66AEsKz3xehSrdoDV6) in KiCAD + Racket.
 * Assembly guide updated to include wood finishing.
 * Cable hole in case spacer has rounded edges.
 * New layout: multidvorak.
@@ -57,7 +105,7 @@ and porting the firmware logic to that.
 
 ## Mark 2: 2014-04-22
 
-* New OpenSCAD case design by Constantine.
+* New OpenSCAD [case design](https://www.flickr.com/photos/technomancy/14719013574) by Constantine.
 * New layouts: hardware dvorak, hardware colemak.
 * Assembly guide.
 
@@ -86,7 +134,7 @@ was documented.
 
 ## NX-01: 2014-02-22
 
-* Initial prototype!
+* [Initial prototype](https://www.flickr.com/photos/technomancy/12805226463)!
 * Case hand-drawn in Inkscape.
 * Teensy 2 microcontroller, hand-wired matrix.
 * Uses TMK firmware.