case/lasergist_steel/README.md

   1 Stainless Steel plates using Lasergist
   2 ======================================
   3
   4 Photos: http://imgur.com/gallery/ZaZHV
   5 !(Stainless Steel Atreus)[http://i.imgur.com/AaAlOPg.jpg]
   6
   7 The illustrator files are ready to be submitted as-is to Lasergist to make stainless steel plates (Cherry MX version)
   8
   9 Choose the following settings:
  10 * Material: **AISI 304 - Shiny**
  11 * Thickness: **1.5 mm**
  12 * **Sandblasting**
  13
  14 Upload the two files:
  15 * **switch-plate-only.ai**
  16   * Overall dimensions: height: 116mm width: 257mm
  17   * Path lengths: 3369mm
  18 * **base-plate-only.ai**
  19   * Overall dimensions: height: 116mm width: 257mm
  20   * Path lengths: 749mm
  21
  22 Additionally, you'll need the following hardware:
  23 * 8x 14mm long M3 screws, low profile head https://www.mcmaster.com/#93070A071
  24 * 8x 8mm long M3 hex nuts https://www.mcmaster.com/#94868A603
  25 * 8x M3 small hex nuts https://www.mcmaster.com/#98676A100
  26
  27
  28