Mention strain relief.

[atreides.git] / README.org

diff --git a/README.org b/README.org
index 2e4b1bfa0516dea079977bd89be3ff8b42261390..552d11d5ea8dd1a361562ecb9a38f01a5181f7d7 100644 (file)
--- a/README.org
+++ b/README.org
@@ -42,7 +42,7 @@ numpad-style arrangement under the right hand:
 
  :    !     @     {     }     |       ||     pgup    7     8     9    *
  :    #     $     (     )     `       ||     pgdn    4     5     6    +
- :    %     ^     [     ]     ~       ||       \     1     2     3    ?
+ :    %     ^     [     ]     ~       ||       &     1     2     3    \
  :   L2  insert super shift bksp ctrl || alt space   fn    .     0    =
 
 The =L2= key switches it to the function layer, and tapping =L0= here
@@ -73,7 +73,7 @@ quickly.
 
 For users that need to operate in sound-sensitive environments like
 open offices or libraries, [[http://deskthority.net/wiki/Cherry_MX_Clear][Cherry MX Clear]] switches are a popular
-choice since they still offer tactility withut the noise.
+choice since they still offer tactility without the noise.
 
 *** Diodes
 
@@ -110,7 +110,7 @@ The =atreus.rkt= program calculates switch and diode positions based
 on row/column counts, spacing, and rotation factors, and emits a
 =atreus.kicad_pcb= file. The board outline and traces are done by hand
 and are stored in the =header.rktd= and =traces.rktd= files
-respectively. The =atreus.kicad_pcb= file can be imported into [[http://kicad.org][Kicad]]
+respectively. The =atreus.kicad_pcb= file can be imported into [[http://kicad-pcb.org][Kicad]]
 which can export Gerber files suitable for fabrication. A copy of the
 Kicad PCB file is included in the repository if you don't want to
 recompile it using Racket. Recompiling is only required if you want to
@@ -146,7 +146,7 @@ On a 100W Epilog laser, the 3mm layers cut in about a minute and a
 half. I did a run with 6mm acrylic of the other layers which took
 nearly 6 minutes.
 
-Wood cases should be finished with sandpaper and finishding oil/wax.
+Wood cases should be finished with sandpaper and finishing oil/wax.
 
 ** Firmware