Advise holding onto the diode leg during trimming.

[atreides.git] / assembly / assembly.tex

diff --git a/assembly/assembly.tex b/assembly/assembly.tex
index b73358f15616a34e94052b677a948b4002cc7cf5..acd18fb5c8aeaf37f25afedb92356c57b1fd2e11 100644 (file)
--- a/assembly/assembly.tex
+++ b/assembly/assembly.tex
@@ -127,10 +127,10 @@ and solder them in place.
   \includegraphics[width=\linewidth]{diodes.jpg}}
 \vspace{1em}
 
-Once they're soldered, trim the diode legs with wire cutters. (This
-step should be done with protective eye covering.) Keep the diode
-legs; they will be needed in the next step. Repeat until each diode
-position is filled.
+Once they're soldered, trim the diode legs with wire cutters. Hold
+onto the diode leg as you trim it to keep it from flying across
+the room. Keep the diode legs; they will be needed in the next
+step. Repeat until each diode position is filled.
 
 \section{Controller}